Preferred Gold Supplier-shelf the 65MN strip → Shanghai Tang, weight]
Spot Supplier: Shanghai Tang Heavy Industry Co., Ltd. Supply & -57866378 / 021-57866676 Mobile: 13816025185 Fax :021 -57,866,679 Contact: Miss Chen after-sales consulting, 021 -57,866,676 Shipping address: QQ: 1803349621
65MN steel strip Introduction The 65mn strength. Hardness. High flexibility and hardenability than 65 steel, with a thermal sensitivity and tendency to temper brittleness, water quenching the formation of cracks tendency. Annealed machinability can still be cold deformation plasticity, poor weldability. Under moderate load plate spring, diameter 7-20mm spiral springs and spring washers, spring ring. High wear resistance parts, such as the grinding machine spindle. Spring chuck precision machine screw. Cutter. Spiral roller bearing ring. Railway rail and so on.
Chemical composition ● Mechanical Properties: Σb (MPa), tensile strength: 825 ~ 925 Yield strength σs (MPa): 520 to 690 Elongation δ10 (%): 14 ~ 22.5 The reduction of area ψ (%): not more than 10 Hardness: hot, ≤ 302HB; Cold Drawn + heat treatment, ≤ 321HB
Heat treatment specification Heat treatment and microstructure specifications: Heat Treatment Specification: quenching 830 ° C ± 20 ° C, cold oil; tempering 540 ° C ± 50 ° C (special needs, ± 30 ° C). The metallographic organizations: troostite. Delivery status: the state of hot-rolled steel to heat treatment or no heat treatment delivery, cold drawn steel to heat treatment delivery. Supplier specifications: wire rods: Φ5.5 ~ 16mm roll: Φ16 ~ 160mm Forgings: Φ160 ~~ 450mm 65Mn density The 65Mn density ρ = 7.85 g / cc, the steel can be cold rolled into plate, strip and wire, production of the spring. 65Mn also produced such as fitter chisel, stylus and other tools. 65Mn steel can be made general cross-section dimensions of a small spring about 8 ~ 15mm variety of small size, such as flat, round spring, the bottom pad spring, spring winding. |